Comprehensive Parametric Study for Design Improvement of a Low-Speed AFPMSG for Small Scale Wind-Turbines

[1]    P. Gipe, ‘‘Wind Power—Renewable Energy for Home, Farm and Business,’’ White River Junction, Vermont: Chelsea Green Publishing Company, 2004.

[2]    A. Saifee, A. Mittal, S. S. Laxminarayan, M. Singh, ‘‘Design of a novel field controlled constant voltage axial flux permanent magnet generator for enhanced wind power extraction,’’ IET Renewable Power Gener., vol. 11 Issue. 7, pp. 1018-1025, 2017.

[3]    V. Behjat and A. Dehghanzadeh, ‘‘Experimental and 3D finite element analysis of a slotless air-cored axial flux PMSG for wind turbine application,’’ J. Oper. Autom. Power Eng., vol. 2, pp. 121-128, 2014.

[4]    D. Habibinia, M. R. Feyzi, and N. Rostami, ‘‘A new method for computation of axial flux permanent magnet synchronous machine inductances under saturated condition,’’ J. Oper. Autom. Power Eng., vol. 6, no. 2, 2016.

[5]    S. S. Laxminarayan, M. Singh, A. Saifee, A. Mittal, A, ‘‘Design, modeling and simulation of variable speed axial flux permanent magnet wind generator,’’ Sust. Energy Tech. Assess., vol 19, pp.114-124, 2017.

[6]    A. Daghigh, H. Javadi, and H. Torkaman, ‘‘Design optimization of direct-coupled ironless axial flux permanent magnet synchronous wind generator with low cost and high annual energy yield,’’ IEEE Trans. Magn., vol 52, no 9, pp.1-11, 2016.

[7]    A. Schmidhofer, and H. Weiss, ‘‘Optimization of power electronics for small stand-alone wind power stations,’’ in Proce. 10^th Europ. Conf. Power Electron. Appl., Toulouse, France, on CD-ROM, September 2-4, 2003.

[8]    M. Shokri, N. Rostami, V. Behjat, J. Pyrhönen, and M. Rostami, ‘‘comparison of performance characteristics of axial-flux permanent-magnet synchronous machine with different magnet shapes,’’ IEEE Trans. Magn., vol. 51, no. 12. 2015.

[9]    Y. Chen, P. Pillay, and A. Khan, ‘‘PM wind generator topologies,’’ IEEE Trans. Ind. Appl., vol. 41, no. 6, 2005.

[10]  A. Cavagnino, M. Lazzari, F. Profumo, and A. Tenconi, ‘‘A comparison between the axial flux and the radial flux structures for MP synchronous motors,’’ IEEE Trans. Ind. Appl., vol. 38, no. 6, pp.1517-1524, 2002.

[11]  P. Curiac, D. H. Kang, ‘‘Preliminary evaluation of a MW-class low-speed AFPMSM with self-magnetization function of the armature coils,’’ IEEE Trans. Energy Convers., vol. 22, no. 3, pp.621-628, 2007.

[12]  P. R. Upadhyay, K. R. Rajagopa, ‘‘FE analysis and computer-aided design of a sandwiched axial-flux permanent magnet brushless DC motor,’’ IEEE Trans. Magn., vol. 42, no. 10, October 2006.

[13]  T. F. Chan, L. L. Lai, ‘‘An axial-flux permanent-magnet synchronous generator for a direct-coupled wind-turbine system,’’ IEEE Trans. Energy Convers., vol. 22, no. 1, March 2007.

[14]  F. Caricchi, F. Crescimbini, E. Fedeli, and G. Nola, ‘‘Design and construction of a Wheel-Directly-Coupled-Axial-Flux PM Motor Prototype for EVs,’’ IEEE-IAS Annual Meeting, Denver CO, pp. 254-261, 1994.

[15]  S. Huang, J. Luo, F. Leonardi, and T. A. Lipo, ‘‘A comparison of power density for axial flux machines based on general purpose sizing equations,’’ IEEE Trans. Energy Convers., vol. 14, no. 2, June 1999.

[16]  S. Huang, J. Luo, F. Leonardi, and T. A. Lipo, ‘‘A general approach to sizing and power density equations for comparison of electrical machines,’’ IEEE-IAS Annual Meeting, San Diego, CA Oct. 1996. pp. 836-842.

[17]  A. Di Gerlando, G. Foglia, M. F. Iacchetti. R. Perini, ‘‘Axial flux PM machines with concentrated armature windings: design analysis and test validation of wind energy generators,’’ IEEE Trans. Ind. Electron., vol. 58, no. 9, September 2011.

[18]  A. Parviainen, ‘‘design of axial flux permanent-magnet low-speed machines and performance comparison between radial-flux and axial-flux machines’, PhD Thesis, University of Technology, Lappeenranta, Finland, 2005.

[19]  N. Rostami, M. R. Feyzi, J. Pyrhönen, A. Parviainen, and V. Behjat, ‘‘Genetic algorithm approach for improved design of a variable speed axial-flux permanent-magnet synchronous generator,’’ IEEE Trans. Magn., vol. 48, no. 12, 2012.

[20]  N. Rostami, M. Rostami, ‘‘Analytical design of afpm machines with cylindrically shaped magnets using quasi-3d method,’’ COMPEL - The Int. J. Comput. Math. Electr. Electron. Eng., vol. 36, no. 4. 2017.

[21]  N. Rostami, M. R. Feyzi, J. Pyrhonen, A. Parviainen, M. Niemela, ‘‘Lumped-parameter thermal model for axial flux permanent magnet machines,’’ IEEE Trans. Magn. vol. 49, no. 3, 1178-1184, 2013.

[22]  D. C. Hanselman, ‘‘Brushless permanent magnet motor design,’’ New York: Elsevier Scientific Publishing Company, 2003.

[23]  T. Heikkilä, ‘‘Permanent magnet synchronous motor for industrial inverter applications–analysis and design,’’ Dissertation. Lappeenranta University of Technology, Finland, 2002.