تعداد نشریات | 27 |
تعداد شمارهها | 364 |
تعداد مقالات | 3,223 |
تعداد مشاهده مقاله | 4,741,350 |
تعداد دریافت فایل اصل مقاله | 3,238,604 |
A Comprehensive DC Railway Traction System Simulator Based on MATLAB: Tabriz Line 2 Metro Project Case Study | ||
Journal of Operation and Automation in Power Engineering | ||
دوره 9، شماره 2، آبان 2021، صفحه 144-159 اصل مقاله (1.95 M) | ||
نوع مقاله: Applied paper | ||
شناسه دیجیتال (DOI): 10.22098/joape.2021.8197.1569 | ||
نویسنده | ||
S. Razmjou* | ||
Department of Management, Faculty of Economics, Management, and Business, Tabriz Campus, University of Tabriz, Tabriz Iran. | ||
چکیده | ||
As a result of rapid global urbanization, energy and environmental sustainability are becoming increasingly significant. According to the Rail Transport and Environment Report published by the International Union of Railways in 2015, energy used in the transportation sector accounts for approximately 32% of final energy consumption in the EU. Railway, representing over 8.5% of the total traffic in volume, shares less than 2% of the transport energy consumption. Railway plays an important role in reducing energy usage and CO2 emissions, compared with other transport modes such as road transport. However, despite the inherent efficiency, the energy used by the rail industry is still high, making the study of railway energy efficiency of global importance. Therefore, in this paper, the development of the comprehensive simulator software for DC-fed railway systems is demonstrated. In the proposed MATLAB based software, the train movement model and railway power network model are integrated into the simulator. This energy simulator can calculate the energy flow of the whole system according to multiple-train driving controls and timetables. Finally, the results of simulations for a standard Railway system are compared to valid references. | ||
کلیدواژهها | ||
Railway systems؛ Traction simulation؛ Multi-train dynamics؛ Metro power system | ||
مراجع | ||
[1] O. Edenhofer, Climate change 2014: mitigation of climate change vol. 3: Cambridge University Press, 2015. [2] R. Transport, "Environment: Facts & Figures," Commun. Europ. Rail. Infras. Co., 2015. [3] P. Fouracre, C. Dunkerley, and G. Gardner, "Mass rapid transit systems for cities in the developing world," Trans. Rev., vol. 23, pp. 299-310, 2003. [4] J. Kettner, "Moving towards sustainable mobility a strategy for 2030 and beyond for the European railway sector." 12 UIC Sust. Conf.,Venice, 2012. [5] A. González-Gil, R. Palacin, and P. Batty, "Optimal energy management of urban rail systems: Key performance indicators," Energy Conv.. Manag., vol. 90, pp. 282-291, 2015. [6] A. González-Gil, R. Palacin, P. Batty, and J. P. Powell, "A systems approach to reduce urban rail energy consumption," Energy Conv. Manag., vol. 80, pp. 509-524, 2014. [7] S. N. Talukdar and R. L. Koo, "The analysis of electrified ground transportation networks," IEEE Trans. Power Appar. Syst., vol. 96, pp. 240-247, 1977. [8] Y. S. Tzeng, R. N. Wu, and N. Chen, "Unified AC/DC power flow for system simulation in DC electrified transit railways," IEE Proc. – Electr. Power Appl., vol. 142, pp. 345-354, 1995. [9] T. Yii-Shen, C. Nanming, and W. Ruay-Nan, "A detailed R-L fed bridge converter model for power flow studies in industrial AC/DC power systems," IEEE Trans. Ind. Electron., vol. 42, pp. 531-538, 1995. [10] D. A. Braunagel, L. A. Kraft, and J. L. Whysong, "Inclusion of DC converter and transmission equations directly in a Newton power flow," IEEE Trans. Power Appar. Syst., vol. 95, pp. 76-88, 1976. [11] D. J. Tylavsky, "A Simple Approach to the Solution of the ac-dc Power Flow Problem," IEEE Trans. Edu., vol. 27, pp. 31-40, 1984. [12] D. J. Tylavsky and F. C. Trutt, "The Newton-Raphson Load Flow Applied to AC/DC Systems with Commutation Impedance," IEEE Trans. Ind. Appl., vol. IA-19, pp. 940-948, 1983. [13] C. J. Goodman, L. K. Siu, and T. K. Ho, "A review of simulation models for railway systems," Int. Conf. Develop. Mass Transit Syst. Publ. No. 453), 1998, pp. 80-85. [14] Y. Cai, M. R. Irving, and S. H. Case, "Modelling and numerical solution of multibranched DC rail traction power systems," IEE Proc. – Electr. Power Appl., vol. 142, pp. 323-328, 1995. [15] Y. Cai, M. R. Irving, and S. H. Case, "Iterative techniques for the solution of complex DC-rail-traction systems including regenerative braking," IEE Proc. Gener., Transm. Distrib., vol. 142, pp. 445-452, 1995. [16] C. L. Pires, S. I. Nabeta, and J. R. Cardoso, "ICCG method applied to solve DC traction load flow including earthing models," IET Electr. Power Appl., vol. 1, pp. 193-198, 2007. [17] "Railway applications – fixed installations Part 1," Protec. Prov. Relat. Electr. Safety Earth., ed. Brussels: CENELEC, 1998. [18] Shao Z.Y., Chan W.S., Allan J., and M. B., "A new method of DC power supply modelling for rapid transit railway system simulation," Int. Conf. Computer Aided Design, Manufac. Oper. Rail. Other Mass Transit Syst., 1994. [19] B. Mellitt, C. J. Goodman, and R. I. M. Arthurton, "Simulator for studying operational and power-supply conditions in rapid-transit railways," Proc. Instit. Electr. Eng., vol. 125, pp. 298-303, 1978. [20] C. J. Goodman and L. K. Sin, "DC railway power network solutions by diakoptics," Proc. IEEE/ASME Joint Railroad Conf., 1994, pp. 103-110. [21] S. Hillmansen, "Electric railway traction systems and techniques for energy saving," IET Prof. Develop. Course Electr. Traction Syst., 2012, pp. 19-23. [22] S. Hillmansen and C. Roberts, "Energy storage devices in hybrid railway vehicles: A kinematic analysis," Proc. Instit. Mechanic. Eng., Part F: J. Rail Rapid Transit, vol. 221, pp. 135-143, 2007. [23] R. Takagi and T. Amano, "Optimisation of reference state-of-charge curves for the feed-forward charge/-discharge control of energy storage systems on-board DC electric railway vehicles," IET Electr. Syst. Transport., vol. 5, pp. 33-42, 2015. [24] R. J. Hill, "Electric railway traction. I. Electric traction and DC traction motor drives," Power Eng. J., vol. 8, pp. 47-56, 1994. [25] C. J. Goodman, "Overview of electric railway systems and the calculation of train performance," 9th Instit. Eng. Tech. Prof. Develop. Course Electr. Traction Syst., 2006, pp. 1-24. [26] B. P. Rochard and F. Schmid, "A review of methods to measure and calculate train resistances," Proc. Instit. of Mechanic. Eng., Part F: J. Rail Rapid Transit, vol. 214, pp. 185-199, 2000. [27] B. BS-EN50641, "Railway applications-Fixed installations - Requirements for the validation of simulation tools used for the design of traction power supply systems," ed: BSI, 2014. [28] Z. Tian, S. Hillmansen, C. Roberts, P. Weston, N. Zhao, L. Chen, et al., "Energy evaluation of the power network of a DC railway system with regenerating trains," IET Electr. Syst. Transport., vol. 6, pp. 41-49, 2016. [29] R. D. White, "DC ELECTRIFICATION SUPPLY SYSTEM DESIGN," 3rd IET Prof. Develop. Course Rail. Electr. Infrast. Syst., 2007, pp. 35-62. [30] P. Pozzobon, "Transient and steady-state short-circuit currents in rectifiers for DC traction supply," IEEE Trans. Vehic. Technol., vol. 47, pp. 1390-1404, 1998. [31] T. Ratniyomchai, S. Hillmansen, and P. Tricoli, "Energy loss minimisation by optimal design of stationary supercapacitors for light railways," Int. Conf. Clean Electr. Power, 2015, pp. 511-517. [32] T. Ratniyomchai, S. Hillmansen, and P. Tricoli, "Optimal capacity and positioning of stationary supercapacitors for light rail vehicle systems," Int. Sym. Power Electron., Electr. Drives, Auto. Motion, 2014, pp. 807-812. [33] X. Li and H. K. Lo, "An energy-efficient scheduling and speed control approach for metro rail operations," Transport. Res. Part B: Methodological, vol. 64, pp. 73-89, 2014. [34] X. Li and H. K. Lo, "Energy minimization in dynamic train scheduling and control for metro rail operations," Transport. Res. Part B: Methodological, vol. 70, pp. 269-284, 2014. [35] A. Finlayson, C. Goodman, and R. White, "Investigation into the computational techniques of power system modelling for a DC railway," 2006. [36] F. Schmid and C. J. Goodman, "Electric railway systems in common use," 5th IET Prof. Develop. Course Rail. Electr. Infrast. Syst., 2011, pp. 1-15. [37] M. Chymera and C. J. Goodman, "Overview of electric railway systems and the calculation of train performance," IET Prof. Develop. Course Electr. Traction Syst., 2012, pp. 1-18. [38] W. Mingli, C. Roberts, and S. Hillmansen, "Modelling of AC feeding systems of electric railways based on a uniform multi-conductor chain circuit topology," 2010. [39] C. Goodman, "Modelling and simulation," 2007. [40] Z. Tian, "System energy optimisation strategies for DC railway traction power networks," University of Birmingham, 2017. | ||
آمار تعداد مشاهده مقاله: 1,138 تعداد دریافت فایل اصل مقاله: 1,478 |