|تعداد مشاهده مقاله||2,879,554|
|تعداد دریافت فایل اصل مقاله||2,122,703|
A New Method for Computation of Axial Flux Permanent Magnet Synchronous Machine Inductances under Saturated Condition
|Journal of Operation and Automation in Power Engineering|
|مقاله 6، دوره 6، شماره 2، اسفند 2018، صفحه 208-217 اصل مقاله (978.53 K)|
|نوع مقاله: Research paper|
|شناسه دیجیتال (DOI): 10.22098/joape.2006.4171.1324|
|D. Habibinia ؛ M. Feyzi؛ N. Rostami|
|Faculty of Electrical and computer engineering, University of Tabriz, Tabriz, Iran|
|Accurate computing of the saturated inductances of Permanent Magnet Synchronous Machine (PMSM) is very important during the design process. In this paper, a new method is presented based on the B-H characteristic of the stator material and unsaturated inductances formulations. This method is used to calculate the saturated inductances of the axial flux PMSM. The synchronous inductance and all of the leakage inductances can be calculated using this method. Two motors with different slot/pole combinations are selected as the case studies. The effectiveness and accuracy of the method is confirmed by 3D Finite Element Analysis (FEA). This method can be extended to other types of electric machines comprising multi-phase winding in their armature such as induction motors and other types of synchronous motors.|
|saturated inductances؛ Permanent Magnet Synchronous Machine؛ Saturation؛ Finite Element Analysis|
 K. J. Meessen, P. Thelin, J. Soulard, and E. Lomonova, “Inductance calculations of permanent-magnet synchronous machines including flux change and self-and cross-saturations,” IEEE Trans. Magn., vol. 44, pp. 2324-2331, 2008.
 H. Chen, Y. Chen, S. r. Huang, and F. Zhang, “Calculation of inductance of permanent magnet synchronous motor considering permanent magnet flux linkage variation of load conditions,” Proce. 2014 IEEE Conf. Expo. Transp. Electrif. Asia-Pacific, 2014, pp. 1-6.
 Y. Gao, R. Qu, C. Yu, L. Jian, and X. Wei, “Review of off-line synchronous inductance measurement method for permanent magnet synchronous machines,” Proce. 2014 IEEE Conf. Expo. Transp. Electrif. Asia-Pacific, 2014, pp. 1-6.
 B. Zaghdoud and A. Saadoun, “Inductances calculation of permanent magnet synchronous machine,” Int. J. Comp.Electr. Eng., vol. 6, p. 267, 2014.
 H. Zhang, B. Kou, L. Wang, Y. Jin, and H. Zhang, “A new inductance measurement method for permanent magnet synchronous linear motor,” Proce. 17th Int. Conf. Electr. Mach. Syst., 2014, pp. 1539-1542.
 Y. Gao, R. Qu, and D. Li, “Improved hybrid method to calculate inductances of permanent magnet synchronous machines with skewed stators based on winding function theory,” Chin. J. Electr. Eng., vol. 2, pp. 52-61, 2016.
 P. Ponomarev, Y. Alexandrova, I. Petrov, P. Lindh, E. Lomonova, and J. Pyrhönen, “Inductance calculation of tooth-coil permanent-magnet synchronous machines,” IEEE Trans. Ind. Electr., vol. 61, pp. 5966-5973, 2014.
 B. Prieto, M. Martínez-Iturralde, L. Fontán, and I. Elosegui, “Analytical calculation of the slot leakage inductance in fractional-slot concentrated-winding machines,” IEEE Trans. Ind. Electr., vol. 62, pp. 2742-2752, 2015.
 M. Bortolozzi, A. Tessarolo, and C. Bruzzese, “Analytical computation of end-coil leakage inductance of round-rotor synchronous machines field winding,” IEEE Trans. Magn., vol. 52, pp. 1-10, 2016.
 D. C. Hanselman, Brushless permanent magnet motor design, 2nd ed. Cranston, R.I.: The Writers' Collective, 2003.
 J. F. Gieras, R.-J. Wang, M. J. Kamper, and SpringerLink (Online service). (2008). Axial flux permanent magnet brushless machines (2nd ed.). Available: http://lib-ezproxy.tamu.edu:2048/login?url=http://dx.doi.org/10.1007/978-1-4020-8227-6
 J. Pyrhonen, T. Jokinen, and V. Hrabovcovâa, Design of rotating electrical machines. Chichester, U.K.: Wiley, 2008.
 V. Behjat and A. Dehghanzadeh, “Experimental and 3D finite element analysis of a slotless air-cored axial flux PMSG for wind turbine application,” J. Oper. Autom. Power Eng., vol. 2, pp. 121-128, 2014.
 H. Nazari and N. Rostami, “Diagnosis of different types of air-gap eccentricity fault in switched reluctance motors using transient finite element method,” J. Oper. Autom. Power Eng., vol. 3, pp. 94-101, 2015.
 A. Tessarolo, “Analytical determination of slot leakage field and inductances of electric machines with double-layer windings and semiclosed slots,” IEEE Trans. Energy Convers., vol. 30, pp. 1528-1536, 2015.
 O. Chiver, E. Micu, and C. Barz, “Stator winding leakage inductances determination using finite elements method,” Proce. 11th Int. Conf. Opt. Electr. Electron. Equip., 2008, pp. 69-74.
 P. Ponomarev, P. Lindh, and J. Pyrhönen, “Effect of slot-and-pole combination on the leakage inductance and the performance of tooth-coil permanent-magnet synchronous machines,” IEEE Trans. Ind. Electron., vol. 60, pp. 4310-4317, 2013.
 R. Ni, G. Wang, X. Gui, and D. Xu, “Investigation of d- and q-axis inductances influenced by slot-pole combinations based on axial flux permanent-magnet machines,” IEEE Trans. Ind. Electron., vol. 61, pp. 4539-4551, 2014.
 J. Graus, A. Boehm, and I. Hahn, “Influence of stator saturation on the differential inductances of PM-synchronous machines with concentrated winding,” Proce. 3rd IEEE Int. Symp. Sensorless Control Electr. Drives, 2012, pp. 1-7.
 J. Graus, S. Luthardt, and I. Hahn, “Influence of rotor saturation on the differential inductances of PM-synchronous machines with concentrated winding,” Proce. 2013 15th Europ. Conf. Power Electron. Appl. (EPE), 2013, pp. 1-10.
 A. Pouramin, R. Dutta, M. F. Rahman, and D. Xiao, “Inductances of a fractional-slot concentrated-winding interior PM synchronous machine considering effects of saturation and cross magnetization,” Proce. IEEE Energy Convers. Congr. Expo., 2015, pp. 6075-6081.
K. Shima, K. Ide, and M. Takahashi, “Finite-element calculation of leakage inductances of a saturated salient-pole synchronous machine with damper circuits,” IEEE Trans. Energy Convers., vol. 17, pp. 463-470, 2002.
 P. Ponomarev, I. Petrov, and J. Pyrhönen, “Influence of travelling current linkage harmonics on inductance variation, torque ripple and sensorless capability of tooth-coil permanent-magnet synchronous machines,” IEEE Trans.Magn., vol. 50, pp. 1-8, 2014.
 K. Shima, K. Ide, M. Takahashi, Y. Yoshinari, and M. Nitobe, “Calculation of leakage inductances of a salient-pole synchronous machine using finite elements,” IEEE Trans. Energy Convers., vol. 14, pp. 1156-1161, 1999.
تعداد مشاهده مقاله: 1,317
تعداد دریافت فایل اصل مقاله: 1,426