|تعداد مشاهده مقاله||2,879,501|
|تعداد دریافت فایل اصل مقاله||2,122,674|
Optimal Design of an Exterior-Rotor Permanent Magnet Generator for Wind Power Applications
|Journal of Operation and Automation in Power Engineering|
|دوره 9، شماره 3، اسفند 2021، صفحه 193-202 اصل مقاله (778.68 K)|
|نوع مقاله: Research paper|
|شناسه دیجیتال (DOI): 10.22098/joape.2021.7337.1532|
|A.A. Abdoos ؛ M.E. Moazzen؛ S.M. Hosseini|
|Department of Electrical and Computer Engineering, Babol Noshiravani University of Technology, Babol, Iran|
|High power permanent magnet synchronous generators (PMSGs) are suitable for wind power applications because of their high efficiency. According to the electromagnetic machine design principles, the main disadvantages of low-speed and high-power generators are large size, heavy weight and high manufacturing cost. The main objective of this paper is to optimize the exterior-rotor PMSG for direct-drive wind turbine applications in order to reduce the generator system cost under design constraints. At first, a multidisciplinary and accurate model is proposed for optimal designing of exterior-rotor permanent magnet wind generator system. Next, the design variables that affect the generator system cost are investigated and specified. Furthermore, the impact of these variables on generator efficiency as one of the main design constraints, are investigated. At last, the unified particle swarm optimization (UPSO) technique is used to optimize the design variables based on the presented analytical model. By comparison the optimal design results of this study with two 500-kW inner-rotor PMSGs and one 15-kW prototype exterior-rotor PM wind generator, it is shown that the proposed method yields an optimal design with lower total volume, lower generator system cost and higher efficiency. Moreover, 3-D finite element analysis is employed to verify the obtained results of the proposed optimal design of 500-kW exterior-rotor PMSG.|
|Permanent magnet (PM) synchronous generator؛ Direct-drive wind turbine؛ Multidisciplinary analytical design model؛ Optimal design؛ Finite element analysis (FEA)|
 O. Anaya-Lara et al., “Wind energy generation: modelling and control”, 1th ed., Wiley Press, USA, 2009.
 Y. Chen, P. Pillay and A. Khan, “PM wind generator topologies,” IEEE Trans. Ind. Appl., vol. 41, pp. 1619-26, 2005.
 A. Grauers, “Design of direct-driven permanent-magnet generators for wind turbines”, Ph.D. dissertation, Dept. Elect. Comput. Eng., Chalmers Univ. Technol., Goteberg, Sweden, 1996.
 H. Li and Z. Chen, “Design optimization and site matching of direct-drive permanent magnet wind power generator systems”, J. Renew. Energy, vol. 34, pp. 1175-84, 2009.
 J. Chen, C. Nayar and L. Xu, “Design and finite-element analysis of an outer-rotor permanent-magnet generator for directly coupled wind turbines”, IEEE Trans. Magn., vol. 36, pp. 3802-09, 2000.
 H. Polinder, F. Pijl, G. Vilder and P. Tavner, “Comparison of direct-drive and geared generator concepts for wind turbines”, IEEE Trans. Energy Convers., vol. 23, pp. 725-33, 2006.
 H. Li, Z. Chen and H. Polinder, “Optimization of multibrid permanent-magnet wind generator systems”, IEEE Trans. Energy Convers., vol. 24, pp. 82-92, 2009.
 J. Potgieter and M. Kamper, “Torque and voltage quality in design optimization of low-cost non-overlap single layer winding permanent magnet wind generator”, IEEE Trans. Ind. Electron., vol. 59, pp. 2147-56, 2012.
 J. Tapia et al., “Optimal design of large permanent magnet synchronous generators”, IEEE Trans. Magn., vol. 49, pp. 642-50, 2013.
 S. Alshibani, V. Agelidis and R. Duta, “Lifetime cost assessment of permanent mag-net synchronous generators for MW level wind turbines”, IEEE Trans. Sustain. Energy, vol. 5, pp. 10-17, 2014.
 S. Lee, Y. Kim, K. Lee and S. Kim, “Multiobjective optimization design of small-scale wind power generator with outer rotor based on box–behnken design”, IEEE Trans. Appl. Supercond., vol. 26, pp. 605-09, 2016.
 A. McDonald and N. Bhuiyan, “On the optimization of generators for offshore direct drive wind turbines”, IEEE Trans. Energy Convers., vol. 32, pp. 348-58, 2017.
 V. Puri, Y. Chauhan and N. Singh, “A comparative design study and analysis of inner and outer rotor permanent magnet synchronous machine for power generation in vertical axis wind turbine using GSA and GSA-PSO”, Sustain. Energy Tech. and Assess., vol. 23, pp. 136-48, 2017.
 T. Bazzo et al., “Multiphysics design optimization of a permanent magnet synchronous generator”, IEEE Trans. Ind. Electron., vol. 64, pp. 9815-23, 2017.
 P. Asef et al., “Multiobjective design optimization using dual-level response surface methodology and booth's algorithm for permanent magnet synchronous generators”, IEEE Trans. Energy Convers., vol. 33, pp. 652-9, 2018.
 C. He and T. Wu, “Analysis and design of surface permanent magnet synchronous motor and generator”, CES Trans. Electrical Machines and Systems, vol. 3, pp. 94-100, 2019.
 J. Pyrhönen, T. Jokinen and V. Hrabovcová, “Design of Rotating Electrical Machines”, 1th ed., Wiley Press, 2009.
 T. Bazzo et al, “Multidisciplinary design optimization of direct-drive PMSG considering the site wind profile”, Elect. Power Syst. Res., vol. 141, pp. 467-75, 2016.
 A. Khan and P. Pillay, “Design of a PM wind, optimized for energy capture over a wide operating range”, Proc. IEEE Int. Conf. Elect. Mach. Drives, pp. 1501-06, 2005.
 M. Nasiri, J. Milimonfared and S. H. Fathi, “Efficient low-voltage ride-through nonlinear backstepping control strategy for PMSG-Based wind turbine during the grid faults”, J. Oper. Autom. Power Eng., vol. 6, pp. 218-28, 2018.
 N. Rostami, “Comprehensive parametric study for design improvement of a low-speed AFPMSG for small scale wind-turbine”, J. Oper. Autom. Power Eng., vol. 7, pp. 58-67, 2019.
 J. Gieras, “Permanent magnet motor technology, design and applications”, 3th ed., Wiley Press, USA, 2010.
 V. Behjat and A. Dehghanzadeh, “Experimental and 3D finite element analysis of a slotless air-cored axial flux PMSG for wind turbine application”, J. Oper. Autom. Power Eng., vol. 2, pp. 121-28, 2014.
تعداد مشاهده مقاله: 635
تعداد دریافت فایل اصل مقاله: 565