پیوندهای مفید
آمار
| تعداد نشریات | 31 |
| تعداد شمارهها | 496 |
| تعداد مقالات | 4,407 |
| تعداد مشاهده مقاله | 7,604,941 |
| تعداد دریافت فایل اصل مقاله | 5,112,368 |
Increasing the Efficiency of the Power Electronic Converter for a Proposed Dual Stator Winding Squirrel-Cage Induction Motor Drive Using a Five-Leg Inverter at Low Speeds | ||
| Journal of Operation and Automation in Power Engineering | ||
| مقاله 3، دوره 6، شماره 1، شهریور 2018، صفحه 23-39 اصل مقاله (1.47 M) | ||
| نوع مقاله: Research paper | ||
| شناسه دیجیتال (DOI): 10.22098/joape.2018.2990.1249 | ||
| نویسندگان | ||
| H. Moayedirad1؛ M. A. Shamsi Nejad* 2 | ||
| 1Department of Electrical and Computer Engineering, University of Birjand, Birjand, Iran. | ||
| 2Department of Electrical and Computer Engineering, University of Birjand, Birjand, Iran, | ||
| چکیده | ||
| A dual stator winding squirrel-cage induction motor (DSWIM) is a brushless single-frame induction motor that contains a stator with two isolated three-phase windings wound with dissimilar numbers of poles. Each stator winding is fed by an independent three-phase inverter. The appropriate efficiency of this motor is obtained when the ratio of two frequencies feeding the machine is equal to the ratio of the number of poles. In the vector control method at low speeds, flux is difficult to estimate because the voltage drop on the stator resistance is comparable with the input stator voltage, disturbing the performance of the motor drive. To solve the abovementioned problem, researchers have benefited from the free capacity of the two windings of the stator. This makes the motor deviate from its standard operating mode at low speeds. The main purpose of this paper is reducing the power losses of the inverter unit in the DSWIM drive at low speeds via the proposed control method and a five-leg inverter. This paper deals with two topics: 1. Using the idea of rotor flux compensation at low speeds, the motor works in its standard operating mode. Therefore, the power losses of the utilized power electronic converters are also reduced to a considerable extent; and 2. Reduction in capital cost can be achieved by utilizing a five-leg power electronic converter. The proposed methods are simulated in MATLAB/Simulink software, and the results of simulation confirm the assumptions. | ||
| کلیدواژهها | ||
| Dual stator winding؛ five-leg inverter؛ induction machine؛ low speed؛ vector control | ||
| مراجع | ||
|
[1] G. K. Singh, “Multi-phase induction machine drive research-a survey,” Electr. Power Syst. Res., vol. 61, no. 2, pp. 139-147, 2002. [2] M. Bigdeli1, D. Azizian, and E. Rahimpour, “An improved big bang-big crunch algorithm for estimating,” J. Oper. Autom. Power Eng., vol. 4, no. 1, pp. 83-92, 2016. [3] E. Abdi, M. R. Tatlow, R. A. McMahon, and P. J. Tavner, “Design and performance analysis of a 6 MW medium-speed brushless DFIG,” in Proce. of the Renewable Power Gener. Conf., 2013, pp. 1-4. [4] P. C. Roberts, “A study of brushless doubly-fed (induction) machines,” PhD dissertation, Dept. Eng., Univ. Cambridge, 2005. [5] A. R. Muñoz and T. A. Lipo, “Dual stator winding induction machine drive,” IEEE Trans. Ind. Appl., vol. 36, no. 5, pp. 1369-1379, 2000. [6] J. M. Guerrero and O. Ojo, “Total airgap flux minimization in dual stator winding induction machines,” IEEE Trans. Power Electr., vol. 24, no. 3, pp. 787-795, Mar. 2009. [7] R. Ueda, T. Sonoda, M. Ichikawa, and K. Koga, “Stability analysis in induction motor driven by V/f controlled general purpose inverter,” IEEE Trans. Ind. Appli., vol. 82, no. 2, pp. 472-481, 1992. [8] R. Bojoi, F. Farina, G. Griva, and F. Profumo, “Direct torque control for dual three-phasei motor drives,” IEEE Trans. Ind. Appl., vol. 41, no. 6, pp. 1627-1636, 2005. [9] K. Pienkowski, “Analysis and control of dual stator winding induction motor,” Archi. Electr. Eng., vol. 61, no. 3, pp. 421-438, 2012. [10] S. Basak, and C. Chakraborty, “Dual stator winding induction machine: problems, progress and future scope,” IEEE Trans. Ind. Electron., vol. 62, no. 7, pp. 4641-4652, 2015. [11] Z. Wu, O. Ojo, and J.Sastry, “High-performance control of a dual stator winding DC power induction generator,” IEEE Trans. Ind. Appl., vol. 43, no. 2, pp. 582-592, 2007. [12] O. Ojo and Z. Wu, “Speed control of a dual stator winding induction machine,” in Proc. Of the IEEE Applied Power Electronics Conference, 2007, pp. 229-235. [13] M. B. Slimene, M. L. Khlifi, M. B. Fredj, and H. Rehaoulia, “Indirect field-oriented control for dual stator induction motor drive,” Proc. Of the 10nd Int. Multi-Conf. Syst., Signals Devices, pp. 18-21, 2013. [14] H. Moayedirad, M. A. Shamsinejad, and M. Farshad, “Neural control of the induction motor drive: robust against rotor and stator resistances variations and suitable for very Low and high speeds,” Iran J. Elect. Com. Eng., vol. 9, no. 2, pp 107-113, 2011. [15] H. Moayedirad , M. Farshad, and M.A. Shamsinejad, “Improvement of speed profile in induction motor drive using a new idea of PWM pulses generation base on artificial neural networks,” Inte. Syst. Electr. Eng., vol. 2, no. 4, pp 35-46, 2012. [16] H. Moayedirad, M. A. Shamsinejad, and M. Farshad, “Improvement of induction motor drive operation in low and high speeds using rotor flux compensation,” J. Iran Association. Electr. & Electron. Eng., vol. 9, no. 2, pp. 59-64, 2012. [17] D. G. Holmes, B. P. McGrath, and S. G. Parker, “Current regulation strategies for vector-controlled induction motor drives,” IEEE Trans. Ind. Electro., vol. 59, no. 10, pp. 3680-3689, 2012. [18] B. M. Joshi and M. C. Chandorkar, “Vector control of two-motor single-inverter induction machine drives,” Electr. Power Compo. Syst., vol. 42, no. 11, pp. 1158-1171, 2014. [19] R. D. Lorenz and D. B. Lawson, “A simplified approach to continuous on-line tuning of field oriented induction motor drives,” IEEE Trans. Ind. Appl., vol. 26, no. 3, pp. 420-424, 1990. [20] M. P. Kazmierkowski, “A novel vector control scheme for transistor PWM inverter-fed induction motor drive,” IEEE Trans. Ind. Appli., vol. 38, no. 1, pp. 41-47, 1991. [21] H. M. Kojabadi, L. Chang, and R. Doraiswami, “A MRAS-based adaptive pseudoreduced-order flux observer for sensorless induction motor drives,” IEEE Trans. Power Electron., vol. 20, no. 4, pp. 930-176, 2005. [22] M. S. Zaky and M. K. Metwaly, “Sensorless torque/speed control of induction motor drives at zero and low frequencies with stator and rotor resistance estimations,” IEEE J. Emerg. and Sel. Top. Power Electr., vol. 4, no. 4, pp. 1416-1429, 2016. [23] C. P. Salomon et al., “Induction motor efficiency evaluation using a new concept of stator resistance,” IEEE Trans. Instrum. Meas., vol. 64, no. 11, pp. 2908-2917, 2015. [24] J. Chen and J. Huang, “Online decoupled stator and rotor resistances adaptation for speed sensorless induction motor drives by a time-division approach,” IEEE Trans. Power Electr., vol. 32, no. 6, pp. 4587-4599, 2017. [25] A. Dey, B. Singh, B. Dwivedi, and D. Chandra, “Vector control of three-phase induction motor using artificial intelligent technique,” ARPN J. Eng. and Appl. Sci., vol. 4, no. 4, pp. 57-67, 2009. [26] Z. G. Yin, C. Zhao , and Y. R. Zhong J. Liu, “Research on robust performance of speed-sensorless vector control for the induction motor Using an interfacing multiple-model extended kalman filter,” IEEE Trans. Power Electr., vol. 29, no. 6, pp. 3011 - 3019, 2014. [27] I. M. Alsofyani and N. R. N. Idris, “Simple flux regulation for improving state estimation at very low and zero speed of a speed sensorless direct torque control of an induction motor,” IEEE Trans. Power Electr., vol. 31, no. 4, pp. 3027- 3035, 2016. [28] I. M. Alsofyani and N. R. N. Idris, “Lookup-table-based DTC of induction machines with improved flux regulation and extended kalman filter state estimator at low-speed operationr,” IEEE Trans. Ind. Inform., vol. 12, no. 4, pp. 1412-1425, 2016. [29] D. Stojic, M. Milinkovic, S. Veinovic, and I. Klasnic, “Improved stator flux estimator for speed sensorless induction motor drives,” IEEE Trans. Power Electr., vol. 30, no. 4, pp. 2363 - 2371, 2015. [30] M. Jones, S. N. Vukosavic, D. Dujic, E. Levi, and P. Wright, “Five-leg inverter PWM technique for reduced switch count two-motor constant power applications,” IET Electr. Power Appl., vol. 2, no. 5, pp. 275-287, 2008. [31] S. Laali, E. Babaei, and M. B. B. Sharifian, “Reduction the number of power electronic devices of a cascaded multilevel inverter based on new general topology,” J. Oper. Autom. Power Eng., vol. 2, no. 2, pp. 81-90, 2014. [32] K. Oka, Y. Nozawa, and K. Matsuse, “An improved method of voltage utility factor for PWM control of a five-leg inverter in two induction motor drives,” IEEJ Trans. Electr. and Electron. Eng., vol. 1, no. 1, pp. 108-111, 2006. [33] C. S. Lim, N. A. Rahim, W. P. Hew, and E. Levi, “Model predictive control of a two-motor drive with five-leg-inverter supply,” IEEE Trans. Ind. Electr., vol. 60, no. 1, pp. 54-65, 2013. [34] Y. Mei and S. Feng, “An optimized modulation method for a five-leg-inverter for dual induction motor drives,” in Proce. of the IPEMC-ECOC, 2016, pp. 660-663. [35] S. Dangeam and V. Kinnares, “Five-leg voltage source inverter for driving two single-phase induction motors,” in Proce. of the 17th Int. Conf. Electr. Mach. Syst., 2014, pp. 156 - 161. [36] O. Ojo and Z.Wu, “Modeling of a dual-stator-winding induction machine including the effect of main flux linkage magnetic saturation,” IEEE Trans. Ind. Appl., vol. 44, no. 4, pp. 1099-1107, 2008. [37] B. K. Bose, Modern Power Electronics and AC Drives. Upper Saddle River, NJ: Prentice-Hall, 2002. [38] J. Hu and B. Wu, “New integration algorithms for estimating motor flux over a wide speed range,” IEEE Trans. Power Electr., vol. 13, no. 5, pp.969-976, 1998. [39] E. Babaei, M. H. Babayi, E. ShokatiAsl, and S. Laali, “A new topology for Z-source inverter based on switched-inductor and boost Z-source inverter,” J. Oper. Autom. Power Eng., vol. 3, no. 2, pp. 167-184, 2015. [40] D. W. Novotny and T. A. Lipo, Vector Control and Dynamics of AC Drives. Oxford University Press, 1997. [41] Z. Zhou, M. S. Khanniche, P. Igic, S. M. Towers, and P. A. Mawby, “Power loss calculation and thermal modelling for a three phase inverter drive system,” J. Electri. Syst., vol. 1, no. 4, pp.33-46, 2005. [42] J. Pou, D. Osorno, J. Zaragoza, S. Ceballos, and C. Jaen, “Power losses calculation methodology to evaluate inverter efficiency in electrical vehicles,” in Proce. of the 17th Int. Conf. Work. Compab. Power. Electron., 2011, pp. 400-409. | ||
|
آمار تعداد مشاهده مقاله: 1,648 تعداد دریافت فایل اصل مقاله: 1,343 |
||